Technical Analysis for FBR - Fastbrick Robotics Ltd
ADX | Long Term | Intermediate Term | Short Term |
---|---|---|---|
Weak or Absent | Up | Up | Down |
Date | Alert Name | Type | % Chg |
---|---|---|---|
Lizard Bullish | Bullish Day Trade Setup | 0.00% | |
Bollinger Band Squeeze | Range Contraction | 0.00% | |
Doji - Bullish? | Reversal | 0.00% | |
Gapped Up | Strength | 0.00% | |
Fell Below 20 DMA | Bearish | 4.00% | |
Bollinger Band Squeeze | Range Contraction | 4.00% | |
Outside Day | Range Expansion | 4.00% | |
Bollinger Band Squeeze | Range Contraction | 0.00% | |
Narrow Range Bar | Range Contraction | 0.00% | |
Inside Day | Range Contraction | 0.00% |
Alert | Time |
---|---|
Possible Inside Day | about 9 hours ago |
Gap Up Partially Closed | about 12 hours ago |
Gapped Up (Partial) | about 12 hours ago |
Rose Above 20 DMA | about 12 hours ago |
Up 2% | about 12 hours ago |
Get this analysis on your stocks daily!
Fastbrick Robotics Ltd Description
Fastbrick Robotics Limited is robotic technology company. The Company focuses on building a bricklaying machine, Hadrian X. The Company's mobile robotic technology focuses on brick and block construction industry. The Company's Hadrian X uses three-dimensional (3D) printing technology and can lay over 1,000 standard brick equivalents (SBE) per hour. Its Hadrian X uses adhesives and/or thin bed mortar and can execute the automatic loading, cutting, routing and placement of bricks to build a house. The Company's Hadrian X is truck mounted and self-powered and its 30 meter robotic arm allows completion of all brickwork from a single position. Its Hadrian X has a software, The Architectural Designer (TAD). The Company’s omni-track laser alignment system corrects dynamic interface and vibration to approximately 0.75 millimeter (mm) accuracy of computer aided design (CAD) design.
Classification
Sector: Industrials
Industry: Farm & Heavy Construction Machinery
Keywords: Software Construction Cement Building Vale California Laser Printing Brick Robot Robotics Omni Adhesive Computer Aided Design Printing Technology Robotic Technology
Indicator | Bull Case | Neutral / Hold | Bear Case |
---|---|---|---|
50 DMA | |||
200 DMA | |||
ADX Trend | |||
Oversold / Overbought | |||
Relative Strength |
Indicator | Value |
---|---|
52 Week High | 0.037 |
52 Week Low | 0.018 |
Average Volume | 3,559,013 |
200-Day Moving Average | 0.023 |
50-Day Moving Average | 0.024 |
20-Day Moving Average | 0.026 |
10-Day Moving Average | 0.026 |
Average True Range | 0.002 |
RSI (14) | 52.61 |
ADX | 6.01 |
+DI | 10.377 |
-DI | 10.849 |
Chandelier Exit (Long, 3 ATRs) | 0.024 |
Chandelier Exit (Short, 3 ATRs) | 0.028 |
Upper Bollinger Bands | 0.028 |
Lower Bollinger Band | 0.024 |
Percent B (%b) | 0.5 |
BandWidth | 16.923 |
MACD Line | 0.000 |
MACD Signal Line | 0.001 |
MACD Histogram | -0.0003 |
Pivot Point Level | Traditional / Classic | Fibonacci | Demark | Woodie | Camarilla |
---|---|---|---|---|---|
Resistance 4 (R4) | 0.028 | ||||
Resistance 3 (R3) | 0.027 | 0.027 | 0.027 | ||
Resistance 2 (R2) | 0.027 | 0.026 | 0.027 | 0.027 | |
Resistance 1 (R1) | 0.026 | 0.026 | 0.027 | 0.027 | 0.027 |
Pivot Point | 0.026 | 0.026 | 0.026 | 0.026 | 0.026 |
Support 1 (S1) | 0.025 | 0.025 | 0.026 | 0.026 | 0.025 |
Support 2 (S2) | 0.025 | 0.025 | 0.025 | 0.025 | |
Support 3 (S3) | 0.024 | 0.025 | 0.025 | ||
Support 4 (S4) | 0.025 |